Make two choices: width, then completion level
Choose the width that suits your terrain and intended build, then decide how much equipment you want to supply yourself. Redcat offers a Vertex-10 and a wider Vertex-10W in both RTR and Slider form. The W axles add 24mm measured from hex to hex. Redcat’s four-model lineup.
| Model | Starting point | Budget beyond the vehicle |
|---|---|---|
| Vertex-10 RTR | Standard-width assembled crawler with electronics | Vehicle battery, suitable charger and transmitter batteries |
| Vertex-10W RTR | Wider assembled crawler with electronics | Vehicle battery, suitable charger and transmitter batteries |
| Vertex-10 Slider | Standard-width chassis for choosing your own running gear | Motor, ESC, radio/receiver, servo, wheels, tires, battery and charger |
| Vertex-10W Slider | Wider chassis for a custom build | Check its own completion list before reusing a parts bundle |
“RTR” still leaves battery and charging choices to you. The Slider price is a chassis starting price; it does not represent the cost of a drivable truck. Sources: Vertex-10 Slider specifications, Vertex-10W RTR specifications, Vertex-10W Slider specifications.
What the wider version changes in your decision
The 10W RTR lists 228mm between the wheel hexes, a 330mm wheelbase and 2.2-inch wheels with 5.25-inch tires. Hex-to-hex width is an axle measurement; it is different from the truck’s overall width across its tires. Vertex-10W RTR specifications.
Our buying suggestion: measure the narrowest passages and gates you regularly drive, then consider the wheel offset and tire width you plan to use. A wider stance may suit an open rock garden, while extra width can make a narrow route less convenient. That is a terrain choice, rather than a claim that one version wins every obstacle.
Before buying axle shafts, steering links or a body, check the exact 10 or 10W part listing. A shared family name does not confirm that every width-dependent part is interchangeable.
When the Slider makes sense
A Slider makes sense when you want to choose the running equipment and can account for everything needed to finish it. Open the accepted Vertex-10 Slider and Vertex-10W Slider separately. Their completion level and exact dimensions matter more than a photograph of a completed build.
For the standard Vertex-10 Slider, Redcat lists a motor, ESC, transmitter/receiver, steering servo, wheels, tires, vehicle battery and compatible charger as required. It specifies an outrunner motor 36mm in diameter and no more than 31mm long, and includes an unpainted body, decals and a 25T servo horn. Those are standard-Slider specifications; do not transfer them automatically to the 10W. Redcat standard Slider requirements.
For either Slider, make a completion sheet before ordering:
| Decision | Evidence to record |
|---|---|
| Motor and ESC | Exact model, motor envelope, mounting pattern, shaft/pinion interface, operating voltage and wire clearance |
| Radio and steering | Receiver compatibility, required channels, servo mounting, horn interface and supply rating |
| Wheels and tires | Axle interface, offset, bead match and body/link clearance through movement |
| Battery and charger | Pack dimensions including wires, connector, chemistry and the ratings permitted by the chosen equipment |
| Finishing and service | Paint suitable for the supplied body, tools, and hardware explicitly omitted by the chosen listing |
Mark each item owned, required or unresolved. Count an owned component only after checking it. Include finishing supplies and shipping when comparing the finished cost with an RTR. For the 10W, confirm the completion list and motor/battery clearance with its manual or Redcat before purchasing an electronics bundle: the readable 10W Slider page does not supply the same detailed completion text as the standard model.
Save the list in the fitment worksheet, then research motors and ESCs and steering servos against those requirements. These category links identify research shelves, not pre-approved completion bundles.
Clicking drivetrain: use Redcat's repair guidance first
Redcat's Vertex-10 shim-kit instructions describe reported drivetrain clicking associated with movement around an undersized transmission output shaft. The remedy includes a revised shaft and shims; Redcat says the original output shaft must be replaced during installation. It also describes optional shimming at other drivetrain locations and notes that some all-metal gear noise remains normal.
A noise alone does not establish that your vehicle has this condition. Record when it occurs and ask Redcat to confirm applicability to your exact model and transmission before ordering or dismantling it. Follow the linked installation procedure if the repair is appropriate. Do not pack in extra shims by guesswork or assume every Vertex needs a kit. This notice is not a universal defect claim or a promise of a free repair.
For other faults, identify the failed assembly and its part number using the Redcat manuals directory. A body, shaft or steering component advertised for Vertex-10 needs an explicit application check before use on the 10W. Keep standard-width research separate from 10W research. Restore a known fault first; add an optional modification only when you can name the remaining limitation and verify the required companion parts.
Compare the exact model
Open each product’s seller offer for the current price, availability and included equipment. Compare identical completion levels before treating a lower listing price as a saving.